Fireproof Roller Shutters AF100

Fireproof Roller Shutters AF100

Fireproof Roller Shutters AF100

-

RELIABLE FIREPROOF PARTITIONS

AF100 is the only roller door in Vietnam that meets the fire resistance standard BS EN 15629-10:2011 standard of UK and TCVN 9383:2012 which certified by the Police Department for Fire Prevention, Fire Fighting and Rescue of the Ministry of Public Security. AF100 can automatically close down in case of fire to prevent the spread of flames and giving people time to move their good as well as escaping to safe zone and limit the damage caused by the fire.


 

FEATURES

Certificated the international fire protection standards

Tested and certified against fire according to BS EN 15629-10:2011 standard of UK and TCVN 9383:2012 which certified by the Police Department for Fire Prevention, Fire Fighting and Rescue of the Ministry of Public Security. The shutters are able to close automatically in the event of a fire and automatically prevent the spread of flames (smoke) from one area to another area from 2 to 4 hours to help mitigate and minimize damage to objects protect human lives in case of fire.

 

Fireproof control devices

The AF100 fireproof roller shutters are equipped with modern fireproof control equipment sets:
- SDS: When a fire signal is received, the door will close down completely
 - TTM: When a fire signal is received, the door will be partially closed for a set amount of time to evacuate people and properties, then continue to completely close to isolate the fire.

Shutter Body

The body of AF100 fireproof roller shutters is made of galvanized steel with a thickness up to 1.2mm and a weight of 20kg/m2 with galvanized paint sticking tightly on the surface that is resistant to heat and fire resistant for a period of time from 2 to 4 hours to help mitigate and minimize damages to objects and protect human lives in case of fire.

Bottom Bars

T-shaped formed by 2 thick perpendicular iron bars with the dimensions up to 50 x 50 x 5mm. Designed depending on the acreage of the shutters to balance the effect of gravity on the shutter body.

Navigation Rails

Made of cubic steel of 3.0 millimeters thickness to ensure the rigidity of the shutters when operating. The spring balancing system is placed in the roller to support the body. The springs are designed to meet 25% of the safety load factor to allow the operation to be safer and easier to use.
 

Specifications

Specifications
SHUTTERS
AF100
Maximum dimensions (Hpb x Wpb)
8.5m x 10.0m
Minimum dimensions (HpbxWpb)
2.5m x 2.8m
Slabs thickness
1.2mm
Colors
#7 (Dark gray)
Paint Technology
High quality outdoor Powder Coating
Frame of technical box
Powder Coating Steel color # 07 (Dark gray) - body’s steel
Rail
AC/Rail H100TS.ST, H200TS.ST
Download Specifications
  • Photos

You want to buy roller shutter products?

You need advice on buying roller shutters Please leave your information, Austdoor will contact you